Digital transducer CON-200 D/D

(abbreviation D/D - means conversion from digital into digital, series 200 - digital transducer with output QPSK or 8PSK modulator)

The appearance of CON-200 D/D


* Transducer is intended for shaping of an integrate output   digital stream from six input digital streams arriving in the   ASI format and one IPTV stream into satellite IF signal   with QPSK or 8PSK modulation (to order)
* 6 ASI input transport streams (2 ASI streams up to
  216 Mbps, 4 streams up to 54 Mbps - cable), IPTV input   (1000BaseT)
* ASI output (up to 216 Mbps), IPTV output (1000BaseT),   "duplicating" ASI stream, four satellite IF streams (QPSK   or 8PSK)
* Remultiplexing of 6 + 1 streams with program encoding
* Control interface Ethernet TCP/IP (100BaseTX)
* Software "DVB Manager"
* Generator of service information: NIT, EPG, TOT, TDT
* PCR regenerator
* Built-in power supply device
* Case 1U (19") 45x483x353 mm, weight 4,5 kg

      CON 200 D/D it is a remultiplexer with DVB scrambler functions and additional forming of up to four signals in the range of satellite IF with QPSK or 8PSK modulation (to order), it has also IPTV (1000BaseT) and ASI (216 Mbps) outputs.
      The device has six ASI inputs (one IPTV input) on which transport streams are supplied. The source of the siganl is professionsl satellite receivers with output of transport stream to ASI or IPTV format. After remultiplexing programs are encoding by DVB scrembler in CON-200 D/D by the system of multiscrypt access MSA (CA_System_ID:0x00004AF7, CA_Specifier: MSA. The system is designed to support up to 300 000 subscribers.
        All control for this equipment, and also monitoring of its condition is fulfiled through operator's computer.
        Basically CON-200 D/D is used in CATV head-ends, in MITRIS networks, MMDS and LMDS, IPTV networks.